Highjoin Level Switch Microwave Type Peek Wetted Parts SS304 Housing Relay Spst or PNP NPN Output

• Customization: Available
• Type: Microwave Sensor Switch
• Principle: Capacitive
• Model NO.: HWM11
• Wires: NPN (Three-Wires)
• Standard: Standard
• Application: Basement
• Measuring Media: Liquid, Slurry, Powder, etc.
• Output Signal: NPN /PNP 1.5 ±0.5V , Rload=10K Relay Spst
• Power Supply: 12~30VDC
• Electrical Connection: M12X1
• Wetted Material: Peek on Default,SS304 or 316L
• Display: Without
• Transport Package: Carton Box
• Trademark: HIGHJOIN
• Origin: China
• HS Code: 9026201090
• Production Capacity: 1000PCS/Year

Product Description

 

Features

1. Not affected by foam, can detect foam, and can also penetrate foam to detect liquid under the foam, stable detection.
2. Can use the handheld operator to set the alarm threshold on site and view the measured value
3. Can effectively detect adhesive conductive slurry, pure water, metal powder, plastic powder, ultra-fine powder, etc.

 

Product Parameters

Measurement principle	sweep frequency
Measurement hysteresis	±1mm
Medium characteristics	DC≥1.5
Response time	0.2s
Damping time	0~5s(Configurable)
Repeatability	±2mm
Power supply	12~30VDC
Start-up time	<1s
Supply current (no load)	8mA  (typical) 50mA  (maximum)
Wetted material	PEEK SS304 or 316L
Wetted surface roughness	Ra< 0.8 μm
Process connection	G1/2 male (by default)
Electronical connection	M12 4-core, 4x0.5mm cable outlet
Output signal	NPN /PNP 1.5 ±0.5V ,Rload=10k Relay SPST
Reverse polarity protection	Yes
Dielectric strength	500VAC
Ambient temperature	Cable lead type: -25~70 ºC M12 connector type: -40~85 ºC
Working temperature	-40°C~+115°C
Working pressure	-0.1~ +10MPa
Output current	20mA(typical); 150mA(optional)
Leakage Current	<100uA
Output short circuit protection	With
Mounting	Top, bottom, side
Protection level	IP67
Humidity	<98% RH, with condensation
Default factory setting	Damping time	0s
	Alarm point parameter AL1	250 (low dielectric constant medium) 550 (water-based medium) 720 (conductive slurry) Output alarm when ≥AL1
	Measurement value PV	0~1000, after calibration: 100: Probe in air 800: Probe in tap water
	Alarm hysteresis	25
	Protection	Parameters cannot be modified before being unlocked

Dimensions(unit:mm)

Typical type

Reverse installation type

 

Electrical Connection

NPN	PNP

Ordering Guide

Code	Output Signal
B9	Relay
B10	NPN
B11	PNP
	Code	Housing Material
	S4	SS304
	S6	SS316L
		Code	Process Connection
		G12	G1/2 male
			Code	Electrical Connection
			C2	Cable outlet
			C5	M12x1 4 pin
				Code	Sealing ring
				0	NA
				FK	FKM
				EP	EPDM
				NB	NBR
					Code	Factory setting
					0	Low dielectric constant medium setting
					1	Water-based medium setting
					2	Conductive slurry setting
					3	User-specific
B10	S4	G12	C5	NB	2

Company Profile