| Customization: | Available |
|---|---|
| Type: | Medium & High Temperature Pressure Transmitter |
| Structure Type: | Diffused Silicon Pressure Transmitter |
|
Still deciding? Get samples of US$ 80/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
|
 |
| Pressure Range | 0~50kPa…40MPa (gauge pressure) 0~50kPa…10MPa (absolute pressure) |
| Temperature Range | -40~100ºC Note: Supports customized intermediate range, such as 0~80ºC, etc. |
| Measuring Medium | Various liquids, gases and various compatible with contact materials |
| Output Signal/Power Supply (1) | Pressure:2-wire 4~20mADC/ Vs=10~30 VDC Temperature:3-wire PT100/PT1000 |
| Output Signal/Power Supply (2) | Pressure:2-wire 4~20mADC/ Vs=10~30 VDC Temperature:2-wire 4~20mADC/ Vs=10~30 VDC |
| Output Signal/Power Supply (3) | Pressure:3-wire 0~5VDC / Vs=8.5~30 VDC Temperature:3-wire 0~5VDC / Vs=8.5~30 VDC |
| Output Signal/Power Supply (4) | Pressure:3-wire 0~10VDC / Vs=12~30 VDC Temperature:3-wire 0~10VDC / Vs=12~30 VDC |
| Output Signal/Power Supply (5) | 4-wire Modbus-RTU/RS485 / Vs=10~30 VDC(Normal) / Vs=3.1~8 VDC (battery supply, low power consumption mode) |
| Accuracy | ±0.5%FS (pressure measure, typical) ±0.2%FS (pressure measure, optional) ±0.4ºC (temperature measure) |
| Long-term Stability | ±0.2%FS/year (pressure measure). ±0.1%FS/year(temperature measure); |
| Response Time | ≤3ms (pressure) |
| Start-up Time | ≤5s |
| *Accuracy according to IEC 60770 (non-linearity, hysteresis, repeatability) | |
| Compensation temperature Range(pressure) | -10~70ºC |
| Temperature Coefficient of Zero (pressure) |
±1.5%FS(Reference 30ºC, in compensation range) |
| Temperature Coefficient of Full Scale(pressure) | ±1.5%FS(Reference 30ºC, in compensation range) |
| Medium Temperature | -40~100ºC |
| Ambient Temperature | -40~85ºC |
| Storage Temperature | -40~85ºC |
| Protection grade | IP65, DIN43650/Hirschmann electrical connection IP66, M12x1 connector (housing without breathable design) IP67, cable outlet (housing without breathable design) |
| Model Name | Type | Bitmap Bitmap Bitmap Bitmap B
|
|||||||||
| HPTM189 | Integrated temperature and pressure Submersible transmitter |
||||||||||
| Pressure Range | Measuring Range | ||||||||||
| (X1~X2)kPa | X1 is the lower limit X2 is the upper limit |
||||||||||
| Temperature Range | Measuring Range | ||||||||||
| (T1~T2)ºC | T1 is the lower limit T2 is the upper limit |
||||||||||
| Code | Output Signal(pressure) | Output Signal(temperature) | |||||||||
| B1PT100 | (4~20)mA | 3-wire PT100 | |||||||||
| B1PT1000 | (4~20)mA | 3-wire PT1000 | |||||||||
| B1B1 | (4~20)mA | (4~20)mA | |||||||||
| B3B3 | (0~10)V | (0~10)V | |||||||||
| B4B4 | (0~5)V | (0~5)V | |||||||||
| B7 | Modbus-RTU/RS485 | ||||||||||
| Code | Process connection | ||||||||||
| P1 | M20×1.5 | ||||||||||
| G12 | G1/2 | ||||||||||
| G14 | G1/4 | ||||||||||
| Code | Electrical connection | ||||||||||
| C1 | DIN43650/Hirschmann | ||||||||||
| C1.1 | DIN43650 type c/Mini-size Hirschmann | ||||||||||
| C2 | cable outlet | ||||||||||
| C5 | M12×1 -4P | ||||||||||
| C6 | M12×1 -5P | ||||||||||
| Code | Pressure connector material | ||||||||||
| S4 | 304 | ||||||||||
| S6 | 316L | ||||||||||
| Code | Length | ||||||||||
| L | L=Insertion length(mm) | ||||||||||
| Code | Additional functions | ||||||||||
| G | Gauge pressure(Default) | ||||||||||
| A | Absolute pressure | ||||||||||
| T5 | 5 heat sinks, temperature resistant to 140°C | ||||||||||
| T9 | 9 heat sinks, temp resistant to 200ºC | ||||||||||
| T9H | 9 heat sinks, microporous structure,temp resistant to 350ºC | ||||||||||
| QF | Factory Report | ||||||||||
| Other requirements | |||||||||||
| Eg:HPTM189 | (0~1)MPa | (0~150)ºC | B1B1 | P1 | C1 | S4 | L=30mm | G T9 | |||
Q: Are you a manufacturer or trader?
A: We are manufacturer which focuses on sensor for 10 years.
Q: What's your quality control system?
A:MC, ISO9001, CE Certificated.
Q: What is the warranty of your products?
A: Our warranty time is 12 months after shipment.
Q: What is lead time of your product?
A: Normally, our factory lead time is within 10~15 working days for products without customization. You can also check lead time detail with our sales depending on different items.
Q: Do you provide customized products?
A: Yes, we can laser mark your logo on products; OEM and ODM customization are welcomed.
Q: What is your MOQ?
A: We have no MOQ limit, small quantity order is acceptable.
Q: What's the transport?
A: Express such as DHL, FedEx, TNT, UPS for freight prepaid; and we can also use your own courier account to do the freight collect. For more goods we can arrange by air or by Sea.
){kind=link}